
Description:
This Cable meets cat6 requirement of both TIA /EIA-568-B.2 and IEC 61156-5 and IEC/ISO 11801. The cable contains 2 double foiled groups of 4 twisted pair laid in parallel and jacketed as Fig-8 (Siamese) cable with PVC compound for indoor use, fixed installation.
Each group have a round configuration, one is marked with a longitudinal rib.
Construction Parameters: | |
Center Conductor: | Bare Copper or Solid CCA (Copper Clad Aluminum) |
Construction: | 23AWG |
Cable: | 8 wires formed into 4 insulated twisted pairs. |
Core Insulation: | HDPE High Density Polyethylene |
Construction: | 1.0±0.05mm |
Core Identification: | 4 colour coded twisted Pairs: Blue+White/Blue, Orange+White/Orange, Green+White/Green, Brown+White/Brown. |
Screening/Shielding: | Unshileded |
Drain Wire: | TC( tinned copper)/CCA |
Outer Sheathing: | PVC (Polyvinyl Chloride), Flameproof / LSZH (Low Smoke Zero Halogen) / PE (outer door). |
Jacket Overall Diameter: | H:6.2±0.02mm. W:12.5±0.02mm |
Outer Jacket Colour: | Customization. with different color stripe is available. |
Stripping cord: | 200D×3 |
Packing: | 1000FT(305M)/Easy Pull Box, Or as customers requirement. |
Making: | As required by customer |
Test: | 100% pass Fluke test. |
Electrical Properties:(BC ITEM) | |
Conductor DC Resistance: | ≦9.5 Ohms/100m |
Unbalance of Pair DC Resistance: | ≦2.5% |
Dielectric Strength between Pairs: | ≦1.0 Kv/min |
Pair Mutual Capacity: | ≦5.6 nF/100m |
Insulation Resistance: | ≧5000 MΩ.km |
Pair Capacitance Unbalance: | ≦330 pF/100m |
Operating Temperature: | -20℃ to +60℃ / -40℃ to + 75℃ |
Installation Temperature: | -20℃ to +60℃ |
Delay Skew (1 to 100MHz): | ≦45 ns/100m |
MHz | IMPEDANCE | ATTN. | NEXT | SRL | ELFEXT | PSNEXT | PSELFEXT | R.L. |
1 | 100+15 | 2 | 74.3 | 28 | 64 | 62.3 | 61 | 20 |
MECHANICAL CHARACTERISTICS | |
Test object | Jacket |
Test material | PVC |
Before Tensile Strength(Map) | ≧13.8 |
Aging Elongation (%) | ≧100 |
Aging Condition (℃×hrs) | 100×168 |
After Tensile Strength(Map) | ≧85% of unaged |
Aging Elongation (%) | ≧50% of unaged |
Cold Bend (-20±2 ℃ ×hrs) | No crack |
Specification Control:
Structured cable products specification are subject to change without notice.
Please contact a sales representative for a current product specification.
Structured cable products strives to ensure product specifications are complete, current, and accurate. Please note, all physical specifications are nominal.



Hot Tags: dual UTP CAT6 lan cable, China, manufacturers, suppliers, factory, customized, bulk

